1.1.6 Cleaning Pool Step- support cleaning pool steps?

Question: device support cleaning pool steps?

Internal info for you (can not be copied)

AquaSense Pro features a dedicated step-cleaning mode and supports cleaning within a depth range of 0.4 m to 3 m.

 Step cleaning has long been a challenge in the pool robot industry, but Beatbot has made significant breakthroughs in this area. As long as the steps are wide enough and the water depth on the steps is ≥ 0.4 m, the robot can clean them effectively.

We continue to optimize this feature by reducing the minimum water depth requirement and improving cleaning performance. These improvements will be delivered via firmware updates.

If the customer has concerns, ask them to provide step dimensions and water depth, and we’ll have our technical team evaluate the case professionally.

Reference Template:

AquaSense Pro/AquaSense can work in a depth range of 0.4 to 3 meters. While most pool cleaning robots cannot clean steps, AquaSense Pro/AquaSense can clean steps if the steps are wide enough to support cleaning operations and the water depth on the steps is greater than 0.4 meters.

We will also continue optimizing step-cleaning functions, such as reducing the water depth limit, improving cleaning capabilities, etc. If you want to experience it, you only need to upgrade its firmware.

If you have concerns, you can provide the parameters of the step size and water depth, and we can ask the technical staff to give you an accurate reply.