I Aquasense 2- Indicator Light

创建者 Can Xu, 修改于星期五, 25 四月在 11:25 AM 由 Can Xu

Aquasense 2/ P0007		Device Status	Indicator Light Color/Status (Ring Light)	Power Button Color/Status	Mode Button Color/Status
	Device Power Status	Power On	Light color changes with battery level & middle white light breathing (then lights expand from center to both sides in a loop)	Before startup: mode + power button in order → breathing → solid white after startup	Breathing white
		Sleep (no operation for 20min)	Light off	White breathing	Corresponding mode button: white fades out
		Power Off	Light off	White off	Corresponding mode button: white fades out
	Wi-Fi Network Status / Connection Status	Enters pairing mode (device hotspot)	Blue flashing	Solid white	Corresponding mode button: solid white
		Connecting to network	Blue flashing	Solid white	Corresponding mode button: solid white
		Online (connected)	Solid blue	Solid white	Corresponding mode button: solid white
		Connection error (connection failed/disconnected)	Orange flashing	Solid white	Corresponding mode button: solid white
		OTA Upgrade	Blue flashing	Solid white	Corresponding mode button: solid white
	Device Operating	Operating normally	Solid green (depends on battery, color may switch)	Solid white	Corresponding mode button: solid white
		Warning, e.g. dustbin not installed properly	Orange flashing	Solid white	Corresponding mode button: solid white
		OTA Upgrade Failed	Orange flashing	Solid white	Corresponding mode button: solid white
		Job completed and returning	Solid green (depends on battery, color may switch)	White flashing	Corresponding mode button: white flashing
	Battery Status	Discharging	Light color indicates battery level: >30% = green solid, 15%-30% = yellow solid, <15% = orange solid	Solid white	Corresponding mode button: solid white
		Charging	Charging light changes with battery level	Solid white	Corresponding mode button: solid white
		Fully Charged	Solid green	Solid white	Corresponding mode button: solid white
	Reset Device	Restore Factory Settings	Orange flashing	Solid white	Corresponding mode button: solid white