Thank you for choosing our product! To ensure you get the best results from the clarifying agent kit, please follow the steps below:
Installation du kit d'agent clarifiant :
1. Remove the cap: Start by removing the cap from the clarifying agent kit.
2. Tear the aluminum film: Tear the aluminum film covering the interface of the kit carefully.
3. Install the kit: Attach the kit to the robot, making sure the interface is facing down. Press firmly on it until you hear a ""click,"" indicating that it is firmly in place.
After installing the clarifying agent kit, briefly press the button (Please check attached image) to enable/disable the clarifying distribution.
Then gently lower the robot into the pool using both hands, and the robot will distribute the clarifier for about 6 minutes.
这篇文章有帮助吗？
很好！
感谢您的反馈。
抱歉我们没能带来帮助
感谢您的反馈。
反馈已发送
感谢，我们将试着改善此文档。